Alabaman
09-18 11:23 AM
...People who go to IV will be redirected to LIV...
I think it would do us more good than bad if we change the name to reflect legal immigration. You'd be surprised that politicians and journalists might even use us to argue their postion of NOT being against legal immigration which would be cheap publicity for us.
I would prefer we qualify it further though... to reflect HIGH SKILLED LEGAL immigrants. HSLIV?
I think it would do us more good than bad if we change the name to reflect legal immigration. You'd be surprised that politicians and journalists might even use us to argue their postion of NOT being against legal immigration which would be cheap publicity for us.
I would prefer we qualify it further though... to reflect HIGH SKILLED LEGAL immigrants. HSLIV?
wallpaper Wallpapers Ubuntu
desi3933
05-11 08:30 PM
desi3933,
Only if "if not otherwise entitled to an immigrant status and the immediate issuance of a visa under subsection (a), (b), or (c) of this section"
In this case they are eligible for FB2A. So it nullifies that.
......
>> In this case they are eligible for FB2A. So it nullifies that.
No they are not. because FB2A applies ONLY if primary applicant is green card holder and I-130 is approved for them. Both the conditions must be met BEFORE I-485 is filed.
If you don't agree with me then ask any attorney and post the response here. Hopefully that will make you see the reasoning.
______________________
Not a legal advice
US citizen of Indian origin
Only if "if not otherwise entitled to an immigrant status and the immediate issuance of a visa under subsection (a), (b), or (c) of this section"
In this case they are eligible for FB2A. So it nullifies that.
......
>> In this case they are eligible for FB2A. So it nullifies that.
No they are not. because FB2A applies ONLY if primary applicant is green card holder and I-130 is approved for them. Both the conditions must be met BEFORE I-485 is filed.
If you don't agree with me then ask any attorney and post the response here. Hopefully that will make you see the reasoning.
______________________
Not a legal advice
US citizen of Indian origin
jnraajan
03-28 12:03 PM
When you search by Nationality, it doesnt return any results.
Once you search by Category (EB), it returns results, but then when you try to sort by a column heard, it loses this restriction.
Also, the sorting doesnt seem to work.
Once you search by Category (EB), it returns results, but then when you try to sort by a column heard, it loses this restriction.
Also, the sorting doesnt seem to work.
2011 Wallpaper Ubuntu Vs. Vista
AjP
July 27th, 2005, 03:26 PM
ok I'm not as good as Freddy (I think :) ) but here is my 2c
Manual adjustments in RAW Converter:
Temperature 6100
Tint +13
Exposure +0.65
Shadows 5
Brightness 50
Contrasat +50
Saturation +26
Curves 6 points
input 2 output 9
input 27 output 22
input 63 output 63
input 140 output 140
input 206 output 189
input 255 output 250
Photoshop:
Shadows/Hightlights
Shadows:
Amount 23%
Tonal Width: 29%
Radius 91px
Highlights:
Amount 44%
Tonal Width: 42%
Radius 47px
Adjustments:
Color Correction: +21
Midtond Contrast: -10
Unsharp Mask:
Amount 86%
Radius 1.0 px
Threshold: 4
Smart Sharpen:
Amount: 67%
Radius: 1.8
Remove: Lens Blur
removed dark spot, kinda get on my nerves :)
http://st.a-j-p.net/pic/gparrraw.jpg
Manual adjustments in RAW Converter:
Temperature 6100
Tint +13
Exposure +0.65
Shadows 5
Brightness 50
Contrasat +50
Saturation +26
Curves 6 points
input 2 output 9
input 27 output 22
input 63 output 63
input 140 output 140
input 206 output 189
input 255 output 250
Photoshop:
Shadows/Hightlights
Shadows:
Amount 23%
Tonal Width: 29%
Radius 91px
Highlights:
Amount 44%
Tonal Width: 42%
Radius 47px
Adjustments:
Color Correction: +21
Midtond Contrast: -10
Unsharp Mask:
Amount 86%
Radius 1.0 px
Threshold: 4
Smart Sharpen:
Amount: 67%
Radius: 1.8
Remove: Lens Blur
removed dark spot, kinda get on my nerves :)
http://st.a-j-p.net/pic/gparrraw.jpg
more...
roseball
03-03 03:10 PM
AGI = American Greencard for Indians
Please add this to the immigration acronyms thread started today...:).......:D........:p
Please add this to the immigration acronyms thread started today...:).......:D........:p
waitingnwaiting
01-21 08:00 AM
I had an appointment at Mumbai Consulate on Jan 5th , 7th year ext. Since my I 797 approval date and stamping date was too short ( 1-2 weeks ) USCIS or DOS failed to update info in PIMS on time. I got yellow slip after few basic questions and told to wait for 2-3 biz days. I informed my lawyer in USA and he made contact to DOS there and ask them to update record. Also I had renewed my Indian passport since I applied for I 797 so they had old pp no in record. Lady from DOS promised to work on my case but didn't give any definite time limit.
but I got reply from Consulate on 4th biz day. Submitted passport via local VFS office and with in 3 days got it back. I think if you contact DOS it would take less time , otherwise 2-3 weeks is normal and 4 weeks or longer is for some rare cases. As long as your history is clean nothing to worry even it takes 3-4 weeks.
Whom did the lawyer contact in DOS. Did he tell you? It will help if we know.
but I got reply from Consulate on 4th biz day. Submitted passport via local VFS office and with in 3 days got it back. I think if you contact DOS it would take less time , otherwise 2-3 weeks is normal and 4 weeks or longer is for some rare cases. As long as your history is clean nothing to worry even it takes 3-4 weeks.
Whom did the lawyer contact in DOS. Did he tell you? It will help if we know.
more...
Hey Ram GC
04-08 11:45 AM
webm: what is the status of your application ( 485), is your NC, SC or fingurprints all clear. Did you speak to any IO about any update on your case as your PD is current ( 01 Oct).
2010 Luxury Ubuntu Wallpaper by
cox
May 21st, 2007, 05:30 PM
Another option... is a soft brush designed for the purpose...
I'm leery of brushes because of the fibers. I have gotten brush fibers into the sensor cavity before and they are a bear to get back out...
I'm leery of brushes because of the fibers. I have gotten brush fibers into the sensor cavity before and they are a bear to get back out...
more...
pappu
07-26 10:55 AM
pappu, the only way the labor can be transferred to new company is if the 485 has been filed for more than 180 days.
in this case, since he is unable to file 485 due to retrogression, the labor is not transferable. what may be transferable is the priority date.
no my point was--
is there an expiry date for labor approval if 140 is not filed?
in this case, since he is unable to file 485 due to retrogression, the labor is not transferable. what may be transferable is the priority date.
no my point was--
is there an expiry date for labor approval if 140 is not filed?
hair Nice Ubuntu Wallpapers
Macaca
01-22 06:22 PM
My company filed my (non-PERM) LC before I joined the company. I was on H1B with another organization. My LC was approved immediately after I joined the company.
I don't know if there is a point at which the person should join the company that has already started processing his/her GC. I know that you can get GC before joining the company processing your GC; for example, if person is not in the country.
All,
Please help with contributions. If you have contributed, please help in contributions from other persons. Thanks.
I don't know if there is a point at which the person should join the company that has already started processing his/her GC. I know that you can get GC before joining the company processing your GC; for example, if person is not in the country.
All,
Please help with contributions. If you have contributed, please help in contributions from other persons. Thanks.
more...
MatsP
November 9th, 2004, 09:41 AM
Sorry to hear about your problem with the D70...
I don't know anything in detail about D70, as I'm a Canon man myself...
But some general thoughts and ideas:
1. From the behaviour, I would think that something has gone wrong with either the RAM or the ROM(flash) in the camera. This would cause a similar thing to a "Blue Screen of Death" that you get on a PC sometimes when something has gone wrong somewher. In a machine like a digital camera, the most sensible thing to do to try to recover is to "reboot", or put another way, reset the camera.
2. It is possible that it's just a "transient problem". Have you tried removing the battery for a longer period of time (at least half an hour), and also, if there is a small battery for keeping the time when changing batteries etc. (don't know if the D70 has one, the Canon ones does), you may want to remove that too to be sure that the camera is "properly powered off". This may of course reset some of your personal settings and definitely should reset the time/date in the camera, but I'm sure you can live with that.
3. It may be possible to "reprogram the flash" using the standard procedure for updating the firmware in the camera. *** I would only do this as a "last ditch attempt" ***. I don't know how this is done, but I'm pretty sure there is a way to load a new set of firmware onto the camera some way. But if it's the RAM that is broken, this may cause the firmware update to fail and that may cause even worse scenario than what you've got, so I would only do that if you think that "Things can't get much worse". This is akin to a PC being re-installed from scratch. Like the PC case, it doesn't actually help much if the actual cause of the problem isn't the software/firmware itself. Don't blame ME if this doesn't help, and it makes things worse!
I hope some of this is of help, if nothing else, to understand what the problem is.
If it really is the RAM that is busted, it's probably going to be fairly expensive, as I don't expect the repairer will replace the individual parts, but rather just swap the whole PCB, which means "all the guts of the camera".
If, on the other hand, it's just the flash that's gone crazy, then it's most likely just a question of "factory programming it", which would be a relatively trivial operation, and shouldn't cost much to fix.
--
Mats
I don't know anything in detail about D70, as I'm a Canon man myself...
But some general thoughts and ideas:
1. From the behaviour, I would think that something has gone wrong with either the RAM or the ROM(flash) in the camera. This would cause a similar thing to a "Blue Screen of Death" that you get on a PC sometimes when something has gone wrong somewher. In a machine like a digital camera, the most sensible thing to do to try to recover is to "reboot", or put another way, reset the camera.
2. It is possible that it's just a "transient problem". Have you tried removing the battery for a longer period of time (at least half an hour), and also, if there is a small battery for keeping the time when changing batteries etc. (don't know if the D70 has one, the Canon ones does), you may want to remove that too to be sure that the camera is "properly powered off". This may of course reset some of your personal settings and definitely should reset the time/date in the camera, but I'm sure you can live with that.
3. It may be possible to "reprogram the flash" using the standard procedure for updating the firmware in the camera. *** I would only do this as a "last ditch attempt" ***. I don't know how this is done, but I'm pretty sure there is a way to load a new set of firmware onto the camera some way. But if it's the RAM that is broken, this may cause the firmware update to fail and that may cause even worse scenario than what you've got, so I would only do that if you think that "Things can't get much worse". This is akin to a PC being re-installed from scratch. Like the PC case, it doesn't actually help much if the actual cause of the problem isn't the software/firmware itself. Don't blame ME if this doesn't help, and it makes things worse!
I hope some of this is of help, if nothing else, to understand what the problem is.
If it really is the RAM that is busted, it's probably going to be fairly expensive, as I don't expect the repairer will replace the individual parts, but rather just swap the whole PCB, which means "all the guts of the camera".
If, on the other hand, it's just the flash that's gone crazy, then it's most likely just a question of "factory programming it", which would be a relatively trivial operation, and shouldn't cost much to fix.
--
Mats
hot License
lostinbeta
10-21 01:19 AM
I actually agree with rev now.... I think the location of the text is what is making it look like there are too many empty spaces.... where if you offset the text it will be one big open space instead of a bunch of big ones.
I think that will make it look better.
I think that will make it look better.
more...
house Ubuntu Wallpaper for 10.04
cfan666666
06-27 03:23 PM
I will send my I-485, I-131 and I-765 to this address:
IMMIGRATION & NATURALIZATION SERVICE
TEXAS SERVICE CENTER
PO BOX 851488 - DEPT A
MESQUITE TX 75185-1488
It's the address on my I-140 approval notice. Have called USCIS, the answer said you can send you I-485 to the address on you I-140 approval notice.
Good luck
IMMIGRATION & NATURALIZATION SERVICE
TEXAS SERVICE CENTER
PO BOX 851488 - DEPT A
MESQUITE TX 75185-1488
It's the address on my I-140 approval notice. Have called USCIS, the answer said you can send you I-485 to the address on you I-140 approval notice.
Good luck
tattoo Wallpaper Ubuntu Logo 3D light
desi3933
05-11 08:30 PM
desi3933,
Only if "if not otherwise entitled to an immigrant status and the immediate issuance of a visa under subsection (a), (b), or (c) of this section"
In this case they are eligible for FB2A. So it nullifies that.
......
>> In this case they are eligible for FB2A. So it nullifies that.
No they are not. because FB2A applies ONLY if primary applicant is green card holder and I-130 is approved for them. Both the conditions must be met BEFORE I-485 is filed.
If you don't agree with me then ask any attorney and post the response here. Hopefully that will make you see the reasoning.
______________________
Not a legal advice
US citizen of Indian origin
Only if "if not otherwise entitled to an immigrant status and the immediate issuance of a visa under subsection (a), (b), or (c) of this section"
In this case they are eligible for FB2A. So it nullifies that.
......
>> In this case they are eligible for FB2A. So it nullifies that.
No they are not. because FB2A applies ONLY if primary applicant is green card holder and I-130 is approved for them. Both the conditions must be met BEFORE I-485 is filed.
If you don't agree with me then ask any attorney and post the response here. Hopefully that will make you see the reasoning.
______________________
Not a legal advice
US citizen of Indian origin
more...
pictures Ubuntu World Wallpaper
9years
04-08 05:59 PM
My Details:
EB3 India
PD: October 15 2003
I-485 filed on July 2nd 2007
I-140 Approved on Aug 15th 2007
Texas Service Center
EB3 India
PD: October 15 2003
I-485 filed on July 2nd 2007
I-140 Approved on Aug 15th 2007
Texas Service Center
dresses wallpapers ubuntu.
pappu
07-26 10:55 AM
pappu, the only way the labor can be transferred to new company is if the 485 has been filed for more than 180 days.
in this case, since he is unable to file 485 due to retrogression, the labor is not transferable. what may be transferable is the priority date.
no my point was--
is there an expiry date for labor approval if 140 is not filed?
in this case, since he is unable to file 485 due to retrogression, the labor is not transferable. what may be transferable is the priority date.
no my point was--
is there an expiry date for labor approval if 140 is not filed?
more...
makeup This wallpaper has the mixture
pd_recapturing
04-21 03:23 PM
Well, if your H1B is based on approved 140 (post 6 years), even that gets invalidated when your 485 is denied due to revocation of I-140.
According to my lawyer, you can very well work on EAD if your 485 is denied because of USCIS's wrongful decision like not looking at AC21 law, July fiasco PD confusion etc ..if you want to be extra conservative here, u can wait till your MTR is filed and you get a receipt notice to start working again.
According to my lawyer, you can very well work on EAD if your 485 is denied because of USCIS's wrongful decision like not looking at AC21 law, July fiasco PD confusion etc ..if you want to be extra conservative here, u can wait till your MTR is filed and you get a receipt notice to start working again.
girlfriend Wallpaper Ubuntu Vs. Vista
msp1976
03-09 05:01 PM
Not sure what you meant by your statement "screwed either way"
Also, please let me know what does EB2 ROW means. Thanks!
Without immigration reform Cannot file I-485 application...Wait for 7/8 years at least.to get green card finally..
ROW is rest of world....All countries except India/China
The EB3 date 'porting' might work....In EB2 your date would get current and you would be fine...
http://travel.state.gov/visa/frvi/bulletin/bulletin_3143.html
Also, please let me know what does EB2 ROW means. Thanks!
Without immigration reform Cannot file I-485 application...Wait for 7/8 years at least.to get green card finally..
ROW is rest of world....All countries except India/China
The EB3 date 'porting' might work....In EB2 your date would get current and you would be fine...
http://travel.state.gov/visa/frvi/bulletin/bulletin_3143.html
hairstyles Ubuntu 9.04 Wallpapers
greencardfever
07-19 11:49 PM
I'm in the same situation sundarpn and I've got the exact same 3 questions as you have. Could someone please answer them.
Thanks.
Thanks.
Appu
04-08 04:23 PM
Zogby, Time, CNN, ABC news, CBS news to do a poll this way:
Who do you think is right on immigration - the house or the senate?
I bet a majority will say "the senate". That should give the House anti-immigration group some pause.
Right now the house majority is doing very badly in popular polls. With a poll like this, they will learn the wrongness of their ways! Like the senate did in the Schiavo case.
If you do find a poll like this, popularize it by sending it to local news outlets.
Who do you think is right on immigration - the house or the senate?
I bet a majority will say "the senate". That should give the House anti-immigration group some pause.
Right now the house majority is doing very badly in popular polls. With a poll like this, they will learn the wrongness of their ways! Like the senate did in the Schiavo case.
If you do find a poll like this, popularize it by sending it to local news outlets.
h1bemployee
06-23 06:29 PM
On what basis will you apply for a H-1 transfer, your present H-1 request has been denied. Even If you apply for a MTR you have pending status, based on which you cannot request for a further extension/change of status. You can apply for a new H-1 consular processing petition, leave the country, once approved, apply for a visa from the consulate and come back on the new H-1.
As my H1 transfer got denied.... I can apply for a new H1 transfer.... right?
I am assuming this from the information I got form this forum. I am really confused..
As my H1 transfer got denied.... I can apply for a new H1 transfer.... right?
I am assuming this from the information I got form this forum. I am really confused..
No comments:
Post a Comment